Cheetah Mounts APTMSB Flat Screen TV Wall Mount Bracket

• Universal Design Fits Nearly All 20-55" TVs
• Low 1.9" Profile Yet Up To 15° Forward Tilt
• Free 6" 3-Axis Magnetic Bubble Level
• Supports Two 16" Stud Installation
• Includes Mounting Hardware

I just bought a 32" Samsung LCD and decided on this mount for it.

Pros: For the price, this is a great deal. I have no experience with other brands of mounts, but I've found this one to be very sturdy and feel comfortable hanging a 30lb TV on it.

Cons: While this was a great purchase for the money, here are the negatives I've found about this mount.

1) The reason I took a star off was because of the design of this mount. Adjusting the screws is very difficult once the TV is hanging. In addition, I needed to get an extra long screwdriver to adjust the bottom-locking screws. I do not have experience with other mounts though, so this may be standard. Still though, it could be a little better designed to be user friendly.

2) The built in level seemed to be off. However, Cheetah includes a free level with this model and I used another one I had just to double check.

3) The directions were straight forward, however, they recommend an 3/16" drill bit for the pilot hole. I found this to be way to small to fit the anchors in and had to use a 3/8" drill bit to get them to fit. Don't try to hammer and force them in, you will just damage the anchor. It should be snug though. 3/8" bit worked.

Overall this was a great product for the price, and I would definitely buy it again.

Buy Cheetah Mounts APTMSB Flat Screen TV Wall Mount Bracket Now

I just used this to mount a 32" lcd to the wall. I wanted the smaller mount for it (the one that only goes to 37") so the ends don't stick out, etc. The harware pack was complete, and everything went together very nice. The mount itself is extremely sturdy, and the metal is nice and thick too. The black finish is nice also.

I will definitely recommend Cheetah Mounts to everyone I know that needs to mount a lcd or plasma.

Shipping was fast. They shipped this product the same day I ordered it.

Read Best Reviews of Cheetah Mounts APTMSB Flat Screen TV Wall Mount Bracket Here

I receieved this product fast. I opened it up and was very pleased with all parts and HW in tact.

Set it up on my wall in a short time, and tilted it perfectly for viewing on my bed.

Very legit!! I am happy with the low low price and very sturdy construction.

Want Cheetah Mounts APTMSB Flat Screen TV Wall Mount Bracket Discount?

I recently ordered two mounts. Unfortunately, only one arrived on the scheduled delivery date. I contacted their Customer Service group via email and received an immediate response. They apologized for the inconvenience and decided to file a claim for the missing mount. Then, they sent another mount 2-day express. I don't know about you but I am not used to a company taking responsibility for delivery issues and resolving the problem quickly. The mounts are excellent. They fit perfectly to the LCD and the wall. My only complaint would be that the distance between the farthest holes were barely 16" wide (typical span between studs). But I was able to align this just right using an electronic stud finder. I research many many site to find a mount for the right application and right price. Trust me, you will be extremely pleased with their mounts. Other similar mounts cost double. They provide all the hardware pieces you'll need.

Save 67% off

I bought this to mount a 32" Panasonic Viera LCD on the wall in my bedroom. Perfect fit for the bolt pattern 200mm x 200mm. It included sets of (4) screws and lock washers in 3 different sizes plus a set of spacers to accommodate almost any flat screen. I had to use a set of the included screws, since the Viera does not come with any. Mounting the brackets was easy, but the screws were a little too long for the bottom 2 holes and bottomed out before becoming tight. I just added the larger lock washers from the set onto the screws for extra distance, and I was able to tighten them completely. I was mounting the set near the ceiling, so I just measured down from the ceiling how far I wanted the top of the set(leave at least 1 inch above set) and added the distance to the screw holes by setting the bracket on the back of set while it was face down. I did not use the level on the bracket, or the included level in the kit since I know that my ceiling is not totally level, and I was more concerned with the distance above the TV to look straight. I found the studs in the wall by using a stud finder, marked the centers, measured down from ceiling the total distance that I mentioned earlier, drilled 4 pilot holes with 3/16th drill bit, and screwed the lag screws with flat washers in using a ratchet. The bracket was not centered due to the stud locations, but was still not visible behind the TV.

When setting the angle of the brackets, do it on the unit while face down BEFORE you try to hang it on the bracket. There is NO ROOM to do it after. If you have to modify the angle, you will have to take it down to adjust it. Also, when assembling the main wall bracket, look at the picture in the book. The short metal brackets are for the sides, and attach the upper and lower brackets into a square (the upper bracket has the level in it).

WORD OF WARNING....DO NOT adjust the angle fully tilted, as the brackets will not clear the bottom bracket of the mount. It must clear it to tighten the lower securing screws from the bottom to prevent the hanging bracket(and your TV) from being knocked off the mount. You will need a pretty long screwdriver to reach the lower securing screws because of the limited distance behind the TV after mounting. Don't worry because the screws are very loose and only need to snug up against the mount to prevent it from falling off.

The cheetah mount is a very heavy powder-coated black, is extremely strong and can handle much more weight that my 32" LCD. I would recommend Cheetah mounts over any other mount out there. It costs less, and is much more durable.